Area iCOOL 10 MHP Technical Information

As with all our products in the iCOOL series, the Inverter condensing unit Area iCOOL 10 MHP has excellent thermodynamic properties and a low environmental impact due to its high-performing efficiency. Its maximum cooling capacity of 9.79 kW at -10/32 ºC R449A, combined with a 380/415-volt 50 hertz 3-phase power supply included with the unit ensures that it performs at the highest level with the lowest possible power consumption. Equipped with one 630 mm diameter fan and weighing 176 kg, it is an ideal condensing unit for medium to large capacity applications. Measuring 439 mm wide, 1289 mm long, 963 mm high, and with an air flow rate of 6150 m3/ h, it is a robust, durable and high-performing condensing unit, ideal for commercial use due to its excellent surface area to capacity ratio. Furthermore, this unit is equipped with a liquid receiver tank with a volume of 10.0 dm³ with a 7/8’’ suction connection and a 1/2’’ liquid connection and uses FV68S refrigerant oil. Model of the compressor in this unit – C-SBS180H00B. Our iCOOL series stands out for its innovative use of Inverter technology, which yields lower energy losses than traditional condensing units. The Inverter condensing unit Area iCOOL 10 MHP has received the highest European and global safety certifications (CE, REACH, RoH and TUV), and features optimal energy efficiency, low noise levels at only 39.3 dB, ecological refrigerants (R134a, R404A, R448A, R449A and R513A), and easy installation and maintenance.

Inverter Condensing Unit Area iCOOL 10 MHP characteristics and advantages

• Efficient maximum cooling capacity of 9.79 kW at -10/32 ºC R449A
• Equipped with one 630 mm diameter fan and weighing 176 kg, these dimensions make it an ideal condensing unit for medium to large capacity applications.
• With an air flow rate of 6150 m3/ h, it is an ideal unit for commercial use due to its excellent surface area to capacity ratio.
• Liquid receiver tank with a 10.0 dm³ capacity with a 7/8’’ suction connection and a 1/2’’ liquid connection
• The unit is compatible with the compressor model C-SBS180H00B and uses FV68S refrigerant oil.
• Cutting-edge Inverter technology yields lower energy losses than traditional condensing units.
• Reduced noise levels at only 39.3 dB.
• Validated by the highest European and global safety certifications (CE, REACH, RoH and TUV)
• Compliance with ECODESIGN standard.

Inverter Condensing Unit Area iCOOL 10 MHP types of refrigerants

R134a

What pressure does R134a refrigerant work with?

The pressure for the proper and adequate operation of a R134a refrigerant is between 151 and 393 Kilopascals (kPa), or 22 and 57 pounds per square inch (PSI).

Why is R134a refrigerant important?

The non-toxic, non-flammable and non-corrosive properties of R134a make it a safe, environmentally-friendly, and non-ozone-depleting refrigerant.

Which refrigerant gas replaces R134a ?

The R134a refrigerant is an efficient replacement for CFCs and HCFCs refrigerants, which have been proven to be harmful to the ozone layer and the environment. Therefore, R134a refrigerant gas can be a good substitute for other commonly used CFCs and HCFCs refrigerants such as R22, R404A and R507.

R404A

What pressure does R404A refrigerant work with?

The R404A pressure chart indicates that the appropriate pressure for an efficient and operation of R404A refrigerant can vary from 29.6 to 2764.8 Kilopascals (kPa), or 4.3 to 401 pounds per square inch (PSI).

Why is R404A refrigerant important?

It is one of the most commonly used refrigerants in the world due to its non-toxic and non-flammable properties. However, it is now considered as a gas with a high Global Warming Potential and its use is in decline.

Which refrigerant gas replaces R404A ?

R-404A was deemed a safe and efficient replacement for CFC and HCFC refrigerants such as R-12 and R-502 in the nineties.

R448A

What pressure does R448A refrigerant work with?

The critical pressure required to liquify R448A refrigerant gas is 46.6 bar (4600 kPa or 667 PSI).

Why is R448A refrigerant important?

R448A refrigerant gas is a safe non-flammable HFO blend with low toxicity and Global Warming Potential, making it an efficient and environmentally friendly alternative to many of its counterparts.

Which refrigerant gas replaces R448A ?

R448A is commonly used as a replacement for R404A and R22 refrigerants

R449A

What pressure does R449A refrigerant work with?

The critical pressure of R449A refrigerant gas is at 44.5 bar (4400 kPa or 638 PSI).

Why is R449A refrigerant important?

R449A refrigerant is not an ozone depleting gas and its low toxicity and non-flammable properties make it a safe and efficient refrigerant gas.

Which refrigerant gas replaces R449A ?

R449A is commonly used as a direct replacement for R404A and R-507 refrigerants.

R513A

What pressure does R513A refrigerant work with?

The critical pressure of R513A refrigerant gas is at 37,67 bar (3769 kPa or 546 PSI).

Why is R513A refrigerant important?

R513A refrigerant is an efficient gas for cooling systems as it does not deplete the ozone layer, it has a low toxicity level and is non-flammable.

Which refrigerant gas replaces R513A?

R513A refrigerant gas is an efficient and compatible replacement for R134a refrigerant gas, as it has a 55% lower Global Warming Potential.